第一部分： 用Toolkit安装Byteon固件
第一步：
下载Toolkit工具安装Toolkit工具。要求win10以上的操作系统。
系统如果安装不成功，请下载VC程序。
第二步：
在Toolkit里找到您的设备。操作方法参考Toolkit 使用教程。记录矿机控制板型号和固件版本。
第三步：
在使用Toolkit安装Byteon固件前，请检查机器固件版本，若是2024年3月之后的版本，需要恢复到此前日期的老固件。对L9及21系列，需要卡刷操作后再安装byteon固件。若已经为老版本固件，但安装不成功，出现类似 reboot failed: SshError(SendError)的错误提示，请网页更新固件为该版本或更早版本，或卡刷固件。
第四步：
选择正确的Byteon固件。如何选择，参考Byteon固件名解析。下载正确的Byteon固件。
第五步：
用Toolkit安装Byteon固件，并进行超频降频操作。
Part One-- Install Byteon firmware with Toolkit
Step 1:
Download Toolkit tool.And install it. Installation requires Windows 10 or later.
If there's an error, install the VC program.
Step 2:
Find your miner in the Toolkit.Operation refer to the Toolkit Tutorial.
Record the miner firmware version, control board type.
Step 3:
If the factory firmware was released after March 2024, it must be downgraded to an earlier version before installing the Byteon firmware using the Toolkit.Download old version firmware. For L9 and 21 series, an SD card flash is required before installing the Byteon firmware.
If the device is already running an older firmware version but the installation still fails with an error such as "reboot failed: SshError(SendError)," please try updating the firmware via the web interface to the same version or an earlier one, or flash the firmware using an SD card.
Step 4:
How to select the right Byteon firmware,refer to Byteon firmware introduction.Download the right Byteon firmware.
Step 5:
Install Byteon firmware in toolkit and configure the miner to do overclocking or underclocking. Operation refer to the guide Overclocking settings tutorial.
第二部分： 用SD卡安装
第一步：
观察控制面板，确定控制板类型。第二步：
下载正确的Byteon固件。第三步：
制作SD卡，下载制卡工具。若是AML控制板，用其他方式制卡。
第四步：
将SD卡插入机器，然后进行超频降频操作。
Part Two-- Install Byteon firmware with SD card
Step 1:
Check the control panel to identify the type of control board.Step 2:
Download the right Byteon firmware.Step 3:
Download the tools to burn the image to the SD card.For AML control board,SD card flashing in special way.
Step 4:
Install SD card into the device,and configure the miner to do overclocking or underclocking. Operation refer to the guide Overclocking settings tutorial.